SHELL AND TUBE HEAT EXCHANGER

Description

SHELL AND TUBE HEAT EXCHANGER

This unit is a shell & tube heat exchanger which is used to study heat transfer processes with direct flow (co-current) and counter flow (counter-current) operating models.

Specifications:
• There are traverse baffles placed in the shell to guide the cold water to maximize the heat transfer.
• Stainless steel tube heat exchanger
• Formed by tubes of stainless steel with hot water circulating in the interior.
• Three segmented baffles located transversely in the shell.
• Frame structure made Aluminum Anodized
• Measurement of the inlet and outlet temperatures of the cold water and the hot water
• Sensors temperature
• Control panel
• Cables and accessories, for normal operation.

•Technical Specifications:
Heat Exchanger : Outer Tube : Stainless steel 304, Ø127x600mm with heat insulator and flanges
• Inner Tube (Capillary) : Stainless steel 304, Ø10x500mm
• Hot pump: Centrifugal with magnetic drive
• Cold pump: max. Power 100 Watt max Flowrate 10Lt/min. max. Power 125 Watt Max. Flowrate 30 L/min.
• All pipe using copper tube 0.5”
• RTD temperature probes
• 4 flow meters, 2 for hot water and the other for cold water, range: 0.2 – 10lt/min
• 4 gate valves to control the flowrate for the cold and hot water
• 4 ball valve to control flow direction of cold and hot water
• PID controller temperature

Requirement:
• Space for footprint : 170 cx 70 x 160cm
• Electricity : 220VAC, 50Hz, 1Ph.. 4000 Watt
• Weight 155kg
• Equipment requires a water source
• The water material used in this practice is demineralized water or distilled water